The KX10DP offers intelligent home protection, incorporating Pet Immune technology to discern between intruders and pets up to 24kg, ensuring security without false alarms. Its features include selectable EOL resistors for panel compatibility and Blue Wave Technology, improving immunity to environmental IR noise for enhanced detection accuracy.
Depending on the environment condition, the detector will automatically adjust the sensitivity.
The detectors intelligent PI (Pet Immune) technology analyses the difference between an intruder and a pet signal, with immunity up to 24kg and 10m coverage range.
The detectors incorporates selectable alarm resistor values of 6K8, 5K6, 4K7 &1K & tamper values of 5K6, 4K7, 2K2 and 1K catering for most control panels on the market.
Supplied with both wall & ceiling mount brackets which provides access for up to two 8 core cables (Tamper kit optional).
Protects from possible infestation from insects, shields air movement in front of the pyro-electric sensor and protects against adverse reflections from inside the detector housing.
3mm polished finish, reduces electrostatic interference on the PIR sensor.
This technology further enhances the detector’s immunity to infra-red noise in the environment. BWT comprises of some key components:
The result of this combination is lower infra-red signal noise amplification and therefore better immunity.
Keep your home protected even if you have pets. The KX10DP’s intelligent Pet Immune technology differentiates between your pets and intruders with pet immunity for even larger pets (up to 24kg – approximately the size of a Labrador).
Blue Wave technology |
Yes |
Automatic sensitivity |
Yes |
Set sensitivity |
Yes (Low) |
Digital temperature compensation |
Yes |
DEOL resistor on board |
Yes |
Tamper protection |
Front and rear |
Maximum range |
10m |
Animal immunity |
Up to 24kg |
Detection speed |
0.3- 3.0m/s |
Coverage angle |
85 degree |
Detection zones |
52 |
Detection planes |
5 |
Detection method |
Digital quad signal processing |
Wall mounted |
Bracket included |
Ceiling mounted |
Bracket included |
Optimum coverage height |
1.8 - 2.4m |
Certified mounting height |
2.4m |
Storage temperature |
-40C to +80C |
Certified operating temperature |
-10C to +40C |
Physical dimensions (H x W x D) |
117 x 69 x 50mm |
Operating voltage |
9-16V DC 13.8V DC typical |
Quiescent current consumption |
13mA @ 12V (Min), 16mA @ 12V (Max) |
Contact Resistance |
<10 ohms |
Relay outputs |
50mA 60 VDC, 42 VAC (RMS) |
Tamper switch |
12V 50mA |
Security Grade |
Grade 2 |
Environmental class |
II |
EN Certificate |
EN50131-2-2:2008, EN50131-1:2006+A1:2009, PD6662:2017 |
Certification type |
IMQ |
Certificate number |
CA12.01173 |
Electrical conformity |
CE |
Warranty |
5 years |
And we’ll get back to you.
