The KX15DTAM is a dual element pyro-electric sensor that boasts Grade 3 compliance. The premium detector features patented anti-masking technology and selectable EOL resistors for compatibility with various control panels. Additionally, it incorporates auto sensitivity, tamper-proof brackets, sealed optics, and ABS plastics for advanced functionality.
The KX15DTAM is suitable for Grade 3 installations. With anti-mask and dual technology the KX15DTAM is the premium detector in the KX range.
This patented and adjustable anti-masking technology ensures that any attempt to mask the detector is reported to the control panel and the system cannot be set until the blockage is removed, making the sensor robust to accidental and malicious attempts to overcome the security of the system.
The detectors incorporates selectable alarm resistor values of 6K8, 5K6, 4K7 &1K & tamper values of 5K6, 4K7, 2K2 and 1K catering for most control panels on the market.
This technology further enhances the detector’s immunity to infra-red noise in the environment. BWT comprises of some key components:
The new 3D optics system enables perfect focusing of the infra-red signal onto the pyro-electric sensor. This allows BWT to clearly identify the positive and negative signal edges.
Digital temperature compensation digitally adjusts the detectors sensitivity to ensure performance is maintained.
Powerful software embedded into a microprocessor is used to process the received information from the pyro-electric sensor. The result of this combination is lower infra-red signal noise amplification and better immunity.
Depending on the environment condition, the detector will automatically adjust the sensitivity.
Supplied with both wall & ceiling mount brackets which provides access for up to two 8 core cables (Tamper kit optional).
Protects from possible infestation from insects, shields air movement in front of the pyro-electric sensor and protects against adverse reflections from inside the detector housing.
3mm polished finish, reduces electrostatic interference on the PIR sensor.
Blue Wave technology |
Yes |
Automatic sensitivity |
Yes |
Set sensitivity |
Auto or Pulse Count 1 |
Digital temperature compensation |
Yes |
DEOL resistor on board |
Yes |
Tamper protection |
Front and rear |
Separate LED indication |
Microwave, PIR, Alarm |
3 microwave frequencies to avoid interference |
Yes |
Maximum range |
15m or 18m |
Volumetric coverage |
Yes |
Dual technology |
Yes |
Detection speed |
0.2 - 2.5m/s |
Coverage angle |
85 degree |
Detection zones |
74 |
Detection planes |
7 |
Adjustable antimasking (antispray) |
Yes |
Anticloaking technology |
Yes |
Protection of area under the detector (creep zone) |
Yes |
White light filter |
6500 Lux |
Protection |
Ultraviolet light filter |
Lens |
3 dimensional |
Optics |
Sealed optics |
Wall mounted |
Bracket included |
Ceiling mounted |
Bracket included |
Optimum coverage height |
1.8 - 2.4m |
Certified mounting height |
2.4m |
Storage temperature |
-40C to +80C |
Certified operating temperature |
-10C to +40C |
Nominal operating temperature |
-30C to +60C |
Physical dimensions (H x W x D) |
117 x 69 x 50mm |
Weight |
125g without bracket |
Operating voltage |
9-16V DC 13.8V DC typical |
Quiescent current consumption |
24mA @ 12V (Min), 30mA @ 12V (Max) |
Contact Resistance |
<10 ohms |
Relay outputs |
50mA 60 VDC, 42 VAC (RMS) |
Tamper switch |
12V 50mA |
Security Grade |
Grade 3 |
Environmental class |
II |
EN Certificate |
EN50131-2-4:2008, EN50131-1, PD6662:2017 |
Electrical conformity |
CE |
Warranty |
5 years |
And we’ll get back to you.
