Detect and protect from carbon monoxide with the CO-WE. The CO-WE (2nd Generation) is an essential lifesaving device, which protects homes and families; raising the alarm locally if CO is present via its internal sounder and remotely through your connected Pyronix app.
The CO-WE (2nd Generation) is an essential lifesaving device, which protects homes and families against this danger; raising the alarm locally via its 85dB sounder and remotely via connected Pyronix smart device apps, if CO is present.
The CO-WE (2nd Generation)’s specially designed chamber allows CO into it. Once inside, a chemical reaction occurs that emits an electrical current as a by-product; the amount of electricity generated is directly proportional to the concentration of CO gas present in the atmosphere. The CO-WE (2nd Generation) determines the concentration by monitoring the electrical current; triggering the alarm if this is too high.
The CO-WE (2nd Generation) has a built-in 85dB local sounder which works independently from the alarm panel, as well
as flashing LED lights when CO is detected. Alongside this, a detection alarm will be sent to the control panel to trigger an alarm, as well as send a voice push notification remotely to the user via connected Pyronix smart device apps. Providing an obvious alarm when CO is detected.
The main detection element of the detector features a fixed L91 lithium battery, continuously detecting within a property and providing peace of mind for 10 years – when running low, this is signalled as a fault on the control panel. The radio module itself has a CR123A battery, providing the usual lifespan of up-to 2 years. When the battery is running low on the radio module, the detector will send a signal to the control panel and the user will receive a push notification via their connected smart device app, to report the issue.
Fully wireless means there is no need to run wiring by lifting floorboards or moving furniture; saving time and money.
CO sensor |
Yes |
Button sensor test |
Yes |
LED sensor test |
Yes |
Sound level |
85dBA |
Signal Strength Indicators (SSI) |
Yes |
Instant two way device control (ITDC) |
Yes |
Pyronix high security two way wireless data encryption protocol (TDE) |
Yes |
Pyronix intelligent jamming detection |
Yes |
Programmable wireless supervision time |
Yes |
868MHz transceiver FM technology |
Yes |
One push to learn |
Yes |
Tranmission method |
Fully encrypted rolling code |
Certified operating temperature |
-10°C to +50°C |
Humidity |
5 - 90% |
Sensitivity range |
EN 50291-1: At 50ppm, the unit must alarm within 60 - 90 minutes At 100ppm, the unit must alarm within 10 - 40 minutes At 300ppm, the unit must alarm within less than 3 minutes |
Physical dimensions (ø x D) |
120 x 37mm |
Weight (including battery) |
195g |
RF power supply |
1 x 3V CR123A (replaceable) |
RF battery life |
2 years |
Sensor power supply |
2 x 1.5V AA (non-replaceable) |
Sensor battery life |
10 years |
Sensor low voltage alert |
2.6 - 2.7VDC |
RF low voltage alert |
2.5V +/-5% @ 25C |
Environmental class |
II |
Electrical conformity |
CE |
Standards |
EN50291-1:2010+A1:2012 |
And we’ll get back to you.
