# A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Shunt Input | 分流输入
This is an input on the panel that will shunt out a group of programmed inputs. The operation of the shunting process is as follows:
|
Action |
Status |
Outputs |
|---|---|---|
|
Shunt Input closed (shunted) |
Inputs within the Shunt Group are inactive |
The ‘Follow Input’ output is live |
|
Shunt Group Input triggered |
No response |
- |
|
Shunt Input opened (unshunted) |
- |
The ‘Follow Input’ output clears. The ‘Shunt Fault’ output is live for 10 seconds. |
|
After 10 seconds |
Inputs in the Shunt Group are active |
Indications off. |
|
Shunt Input opened with an active detector (attempting to unshunt) |
- |
The ‘Follow Input’ output clears. The ‘Shunt Fault’ output pulses until the shunt is reset or the input fault clears. |
|
Active input clears |
- |
The ‘Shunt Fault’ output is live for 10 seconds. PLEASE NOTE: This will not function correctly on an ATE pin |
|
After 10 seconds |
Inputs in the Shunt Group are active |
Indications off. |
|
Shunt Group Input triggered |
Normal input response |
(Note: depends upon the status of the Area in which the shunt is located). |
这个主机内的输入能分流一组编程好的输入
|
|
|---|---|
| Letter Selection |
Email Enquiry |
| 选择词条 | 邮件咨询 |